ITL231A Mine Detector

ITL231A

Specifications and Characteristics

Receiver

Central Frequency 1 or 2 GHz
Dynamic Range 75 dB (w/o averaging), 100 dB (with averaging)
Detection Range 100 or 50 cm
Programmable Timing Window 6,66 to 60 ns
Programmable Sampling Interval 26 to 234 ps
Velocity 1 to 9
ADC Resolution 12-Bits
Record Length 256

Transmitter
Output Pulse Amplitude 25 V into 50 OHm
Pulse Widths 1 or 0.5 ns
Pulse Repetition Rate 50 kHz

Antennas
Type Horn
Bandwidth 0,4 to 2,4 GHz

CPU
Type Intel Pentium-133 or higher
RAM 8 Mbytes
Flash disk 10 Mbytes
Solid State Data Drive 4 Mbytes

Display
Type Electroluminescent
Format 320x240 pixels (1/4 VGA)
Display Area 115.1x 86.3 mm
Display Resolution 0.26 mm

Detection Capability
Anti-personnel mines 8 cm Diameter on 10 cm Underground Depth
Anti-tank mines 30 cm Diameter on 70 cm Underground Depth

Software
Amplification Linear or Exponential
Display Format Scope, Gray scaling, Wiggle, Profile
Graticule Axis, Grid, Off
Display Intensity Variable
Save/Recall Up to 10 front-panel setups
Beeping Provides when detects dangerous
Blinking Provides when detects dangerous

Power Requirements
Batteries 10 pc D-size
Typical Voltage 12.6 V
Range 11 to 13.2 V
Current less than 2 A

DC Power Supply
Voltage Range 9 to 15 V
Current 2 A
Power less than 25 W

Environmental
Operational Temperature 25°C to +50°C
Storage Temperature -50°C to +60°C
Humidity 98% (RH)

Physical Dimensions and Weight
Control unit with batteries 282x105x280 mm / 6,0 kg
Display unit 190x122x42 mm / 0,6 kg
Antenna length At smallest: 1 m, Extended: 1.8 m, Base: 354x173 mm / 2.3 kg
Headphones 0.3 kg
Mine Detector ITL231A (total) 9.3 kg