Heads

Eltesta delivers wide range of external heads providing some unique measurement capabilities for UDS-2000 Series of PC-Sampling Oscilloscopes.

There are three types of the heads - Trigger Heads, Clock Recovery Heads and Pulse Heads.

 
Trigger Heads
 
  UDX-T01  
UDX-T01 Trigger Head
  • Trigger-countdown Head
  • 500 MHz to 10 GHz Trigger Bandwidth
  • High sensitivity of 100 mV p-p.
  • Less Than 2.5 ps max RMS Jitter.
  
  UDX-P01, UDX-P02  
UDX-P01 and New UDX-P02 Prescale Trigger Heads
  • 500 MHz to 12 GHz (UDX-P01) and to 18 GHz (UDX-P02) Trigger Bandwidth
  • Less Than 2.5 ps max, 2.0 ps typ. RMS Jitter
  • No Trigger Level control to synchronize the internal oscillator with an input signal
  
  UDX-P03  
New UDX-P03 Low-Jitter Trigger Head
  • Trigger-prescaled Head
  • 2 GHz to 12 GHz Trigger Bandwidth
  • High sensitivity of 200 mV p-p up to 8 GHz
  • Less than 300 fs typ. RMS Jitter
  • 1-m extended cable to reduce the input cable losses
 
Clock Recovery Heads
 
  UDX-R01
UDX-R02
UDX-R03		  
UDX-R01, UDX-R02 and New UDX-R03 Clock Recovery Heads
  • Electrical Clock Recovery Heads
  • 622 Mbps (UDX-R01), 2.488 Gbps (UDX-R02) and 10 Mbps to 2.7 Gbps Continuous Rate (UDX-R03) Clock Recovery Trigger
  • Low Jitter.
  • 1-m extended cable to reduce the input cable losses
 
Pulse Heads
 
  UDX-G01  
UDX-G01 Pulse Head
  • Tunnel Diode Pulse Head
  • 35 ps own Rise Time.
  • 200 mV into 50 Ohm Amplitude
  • 50-Ohm Source
  • Low Aberrations
  • 2 ps typical Displayed RMS Jitter
  
  UDX-G11, UDX-G13  
New UDX-G11, UDX-G12, UDX-G13 and UDX-G14 Pulse Heads
  • Interchangeable Pulse Heads with Fixed Amplitudes of 2 V (UDX-G12, UDX-G14), or 400 mV (UDX-G11, UDX-G13)
  • Loop-through TDR/TDT Heads (UDX-G11, UDX-G13), or TDT Heads (UDX-G12, UDX-G14).
  • 100 ps own Rise Time.
  • 50-Ohm Source
  • Low Aberrations
  • 3 ps typical Displayed RMS Jitter